Wholesale & Project Buying Guide
T6, T8 and T10 LED Tubes with Lamp-Ready Fixtures: A Wholesale Buyer’s Guide
A bulk retrofit order connects the tube family, power arrangement, lamp holders, internal wiring and fitting body. This guide helps importers, wholesalers and project teams compare T6, T8 and T10 LED tubes, then choose a clear replacement route before requesting a quotation.
See the whole system
A T8 Retrofit Is Not Only a Tube Decision
The old tube is only one component. Document the complete fitting so that the buyer, supplier and installer are evaluating the same system.
First buying decision
Replace the Tube Only—or Standardize a Complete Fixture?
The correct route depends on the condition of the existing fitting and the need for repeatable future supply.
| Market route | General meaning | Buyer must confirm |
|---|---|---|
| Type A / ballast-compatible | Designed to operate with specified compatible ballasts. | Exact ballast model, compatibility list and fitting condition. |
| Type B / direct-wire | Follows a specified mains-input arrangement after ballast removal or bypass. | Single- or double-ended input, holder arrangement and local requirements. |
| Hybrid / Type A+B | Designed for more than one approved operating route. | Approved modes for the exact tube; “hybrid” is not universal compatibility. |
| New lamp-ready fitting | New housing, holders and internal wiring matched to the selected tube. | Length, tube count, body, holders, wire, terminals and packing. |
Safety: This is a procurement guide, not an installation guide. Rewiring and electrical modification must be reviewed and completed by qualified personnel under applicable local requirements.
Electrical matching
Single-Ended and Double-Ended Power Are Different
The diagram for the selected LED tube must match the lamp holders and internal wiring. A product photo alone cannot confirm this.
Shunted Holder
The two contacts inside one holder are electrically connected. Suitability depends on the selected tube and circuit design.
Non-Shunted Holder
The two contacts remain separate. Some single-ended arrangements require this layout; confirm the exact tube diagram.
Do not select by length alone
T6, T8 and T10 Are Different LED Tube Families
| Family | Physical distinction | Procurement reminder |
|---|---|---|
| T6 | A slimmer linear LED tube format. | Confirm the exact cap, diameter, length, input arrangement and current availability before matching a fixture. |
| T8 LED tube | A common linear tube family used with G13 holders in many commercial fittings. | Confirm length, input arrangement, holders and fitting body. |
| T10 LED tube | A wider linear LED tube format than T8. | Confirm the cap, diameter, length and electrical arrangement; visual similarity does not prove compatibility. |
Mechanical matching
Match the T8 Fixture to the Project Layout
YUTUO’s relevant supply scope includes common 0.6 m and 1.2 m iron T8 fittings. Compare slim T8 brackets and wide T8 brackets, then confirm the single- or double-tube configuration for the selected model.
Wholesale specification
Five Information Groups for a Clear Quotation
- Reference: fitting photo, holder photo and visible ballast or starter label.
- Configuration: T6, T8 or T10 tube, length, tube count and input arrangement.
- Fixture: slim/wide body, steel, coating, holder, wire and terminal.
- Order: first quantity, repeat stock, destination and timing.
- Packing: neutral bag, shrink wrap, colour box and outer carton. Review the full T8 wholesale specification guide before comparing quotations.
Natural keyword coverage
Typical B2B Replacement Situations
| Situation | Buying focus |
|---|---|
| Factory maintenance replacement | Existing fitting condition, approved tube, body style and repeat stock. |
| Workshop task-lighting replacement | Mounting position, work-surface requirement and fitting layout. |
| Warehouse picking-aisle retrofit | Aisle layout, mounting height, old system and maintenance access. |
| Electrical wholesaler replenishment | Previous parameters, quantity, neutral packing and branch-stock plan. |
Next product path
Continue After the Specification Is Clear
Buyer questions
Frequently Asked Questions
Can every fluorescent T8 fitting accept an LED tube?
No universal assumption should be made. Confirm the ballast or wiring, lamp holders and the selected tube manufacturer’s instructions.
When is a lamp-ready fitting clearer than a tube-only retrofit?
When existing housings, holders or wiring are ageing or inconsistent, or when one repeatable specification is needed for future stock.
Can holders, wire and terminals be changed for OEM supply?
YUTUO can review PP or PC holders, standard or spring-loaded options, wire and terminal requirements. Availability and price depend on the confirmed model, quantity and specification.
Is a product photo enough for an accurate quotation?
No. Also confirm length, tube count, body thickness, holders, wiring, terminals, packaging, quantity and destination.
Send the Existing Fitting Photo Before Finalizing the Order
Share tube length, tube count, fitting photos, quantity and destination. YUTUO can review whether the enquiry is better matched to LED tubes, lamp-ready fixtures or combined supply.